Florencio Varela 155 - Villa Martelli (1603) - Pcia de Bs.As. - Argentina 

Phones: (54-11) 4709-4070 / 4353 / 2120 / 2124 / 1325 / 4866 / 1468 - Fax: (54-11) 4709-7873
e-mail: ventasmail@metpor.com.ar

Wire mesh elements 

MODEL CM

MET POR metal wire mesh elements are specially design for process or service lines. These elements support high differential pressure due to its tough construction.
Plain cartridges are specially design for easy cleaning of the filtration media and maximum differential pressure due to the flat surface that supports the mesh.
Market applications: Water, petroleum, paints, inks, adhesives, cosmetics, etc.
Different types of wire mesh are used, square wire mesh, twilled wire mesh, plain Dutch weave, twilled Dutch weave, etc all of them in stainless steel.

Plain wire mesh elements
Plain wire    mesh     elements

FILTER MEDIA AND DIMENSIONS

CM cartridges are provided in universal sizes, diameter 2-1/2" O.D., 5" (127mm), 10ö (254mm), 20" (508mm), 30" (762mm) and 40" (1016mm) length.
Also special custom sizes may be manufactured. 
Depending on the application, end caps and cores may be supplied in stainless steel, galvanized, plastic, etc.
Micron ratings available are from 12 Ám to 5000 Ám (See wire mesh table)
On plain wire mesh elements, the filter media is wrapped around the central core, when fine micron ratings are used, a drainage intermediate mesh is used to get more specific flow rate through the element. 
End options covers, plain gaskets, central o'rings, outer o'rings, screws,etc.

CARTRIDGES END ADAPTERS

These cartridges may be manufactured with different type of end adapters to fit in your housing. Some of most common types are:

HOW TO ORDER

SCREENS TABLE

WIRE MESH SCREENS USED ON FILTER CARTRIDGES

MESH RETENTION ° WIRE % FREE AREA
4 5160 Ám 1,19 mm 65,9
5 4050 Ám 1,04 mm 63,2
6 3350 Ám 0,89 mm 62,7
8 2460 Ám 0,71 mm 60,2
10 1910 Ám 0,63 mm 56,3
12 1520 Ám 0,58 mm 51,8
14 1300 Ám 0,51 mm 51,0
16 1130 Ám 0,45 mm 50,7
18 980 Ám 0,43 mm 48,3
20 860 Ám 0,40 mm 46,2
24 700 Ám 0,35 mm 44,2
30 540 Ám 0,30 mm 40,8
40 440 Ám 0,25 mm 36,0
50 280 Ám 0,22 mm 30,0
60 230 Ám 0,19 mm 30,5
80 180 Ám 0,14 mm 31,4
100 140 Ám 0,11 mm 30,2
120 117 Ám 0,09 mm 30,7
150 104 Ám 0,06 mm 37,4
200 74 Ám 0,05 mm 33,6
250 61 Ám 0,04 mm 36,0
325 44 Ám 0,03 mm 30,0
400 36 Ám 0,02 mm 36,0
500 25 Ám 0,02 mm 27,0
200x1400(REPS) 12 Ám 0,04 mm 20,0