Florencio Varela 155 - Villa Martelli (1603) - Pcia de Bs.As. - Argentina
Phones: (54-11) 4709-4070 / 4353 / 2120 / 2124 / 1325 / 4866 / 1468 - Fax: (54-11) 4709-7873 
e mail: ventasmail@metpor.com.ar

Coalescers for air and gas model "MET"

MODEL MET
Coalescer filters for air and gas model MET, give a reliable, economic solution to system that require clean air free of water. 

APPLICATIONS
This type of filter is used for the removal of particles, aerosols and bacteria from gas streams.
They totally remove oil-water emulsions form compressed air lines .

WORKING PRINCIPLE
The coalescing element MET-POR presents a filtration effect in three different stages. Compressed air fuul of oil and dirt comes through the element from the inside to the outside, coarse particles are trapped in the inner pre-filter. Oil, water and other particles pass through the main media, this media makes two different filtrations; 99.99% of all oil and water aerosols are trapped in the surface of the fibers and by coalescence they begin to grow in size then they are drag to the foam in the outer part of the element, in this big area the air and drops are separated and drops go to the bottom of the filter sump while the air goes up to the outlet of the filter. Oil and water are continually drained by means of an automatic valve (optional) maintenance free.

METPOR Coalescers filters
METPOR Coalescers filters
MET0090 coalescer filter

GENERAL DATA

MODEL FC

MODEL

CONNECTION
(inch)
LINE PRESSURE (psig) FLOW RATE MAX (SCFM)
MET-0010 " (Screwed) 100 30
MET-0015 3/4" (Screwed) 100 70
MET-0020 1" (Screwed) 100 100
MET-0060 1 " (Screwed) 100 250
MET-0090 2" (Screwed) 100 400
MET-0120 2" (Flanged) 100 500
MET-0160 3" (Flanged) 100 750
MET-0240 3" (Flanged) 100 1150
MET-0320 4" (Flanged) 100 1500
MET-0480 4" (Flanged) 100 2250
MET-0640 6" (Flanged) 100 3000
MET-0960 6" (Flanged) 100 4500
MET-1280 8" (Flanged) 100 6000
MET-1600 8" (Flanged) 100 7500
MET-1920 10" (Flanged) 100 9000
MET-2560 10" (Flanged) 100 12000

OPTIONAL

Drain and vent valves, pressure gauges, differential pressure gauges, ruptur disc, thermometers, etc.

SPECIFICATIONS

Small models to MET-0090 consist of a casting head (carbon steel, stainless steel or injected aluminium) which has the filtration element, and the sump that screws into the head. The seal is done by means of an o'ring.
Big models are manufactured with a head body flanged connection, inlet outlet flanged connections in line and screwed drain connection.
Materials available are carbon steel, aluminum and stainless steel.
Interior linings may be epoxi coatings, rubber, polyamide, PTFE, etc.I

FILTRATION ELEMENTS

MODEL FLOW RATE
(Air SCFM)
FILTRATION AREA SQIN
100 30 200
200 120 400
300 500 800
400 700 1100

Refered to 100 psig and 70F

DIMENSIONS OF FILTERS

MET Filter (Flanged connections) MET Filter (Screwed connections)
 
MODEL MET -  DIMENSIONAL DATA (inch)

MODELO

A B C
MET-0010 3-3/4 15-3/8 16-3/4
MET-0015 3-3/4 15-3/8 16-3/4
MET-0020 3-3/4 15-3/8 16-3/4
MET-0060 6 20 21-7/8
MET-0090 6 20 21-7/8
MET-0120 11 29-3/8 35-1/2
MET-0160 12-1/2 40 44
MET-0240 14-1/8 40 46-1/2
MET-0320 16-1/8 30-3/8 37-1/4
MET-0480 16-1/8 40-1/2 47-7/8
MET-0640 21-1/4 44-1/2 53-1/2
MET-0960 21-1/4 44-1/2 53-1/2
MET-1280 26 47-1/4 58-1/4
MET-1600 26 48-1/4 60-1/4
MET-1920 31-1/2 51-1/8 64-1/8
MET-2560 31-1/2 51-1/8 64-1/8

Dimensions may vary without previous warning.